فیلتر ماسک بی ال اس مدل BLS 322 A1B1E1K1P3 R
فیلتر فوق برای نصب روی ماسکهای نیمصورت و تمامصورت تولید میشود. این فیلتر کیفیت ساخت بالایی دارد و شرکت معتبر و باتجربهی «بی ال اس» (BLS) آن را تولید میکند. این شرکت فیلتراسیونی قوی برای این فیلتر درنظر گرفته است. این محصول دربرابر گازها و بخارات طبیعی مانند حلالها که نقطهی جوشی بالاتر از 65 درجهی سانتیگراد دارند مناسب است. این مشخصه با رنگ قهوهای روی فیلتر مشخص شده است. از دیگر ویژگیهای این محصول میتوان به مقاومت آن دربرابر گرد و غبار و گازها و بخارات غیرطبیعی مانند کلرین، هیدروژن سولفید و هیدروسیانیک اسید اشاره کرد. از این فیلتر میتوان برای مقابله با گازهای اسیدی مانند سولفورها و اینیدریدها استفاده کرد و دربرابر گازها و مشتقات آمونیاک نیز مقاومت مناسبی دارد. این فیلتر دارای استانداردهای EN 14387: 2004 و A1: 2008 است. برای استفاده از این فیلتر دمای محیط نباید کمتر از منفی 10 و بیش از 50 درجهی سانتیگراد باشد. استفاده از این فیلتر در محیطهایی که میزان اکسیژن آن کمتر از 17 درصد است جایز نیست. از این فیلتر نمیتوان برای گازهای بیبو و بدون طعم استفاده کرد.
- مناسب برای جلوگیری از استنشاق گازها و بخارات طبیعی با نقطهی جوش بالای 65 درجهی سانتیگراد مانند حلالها
- مناسب برای جلوگیری از استنشاق گازها و بخارات غیر طبیعی مانند کلرین، هیدروژن سولفید و هیدروسیانیک اسید
- مناسب برای جلوگیری از استنشاق گازها و بخارات اسیدی مانند سولفورها و انیدریدها
- مناسب برای جلوگیری از استنشاق گازها و بخارات آمونیاک و مشتقات آن
- مقاوم دربرابر گردوغبار
- قابل استفاده در دمای منفی 10 تا مثبت 50 درجه سانتیگراد
- قابل استفاده در رطوبت کمتر از 80 درصد
- مناسب برای مکانهایی با حجم اکسیژن بالای 17 درصد
- غیر قابل استفاده برای گازهای بیبو و بیطعم مانند مونواکسید کربن
- وزن هر فیلتر 153 گرم
Protection against gases, vapours and dusts, fumes and mists 300 Series Filters
BLS 322 A1B1E1K1P3 R EN 14387:2004+A1:2008
Characteristics
322 ABEK1P3 R is a gas filter and protects against gaseous contaminants and airbone dusts. 322 ABEK1P3 R filter is equipped with a special threaded connection allowing to use it, in pair, on BLS half masks TP2000 R, TP2000 S and on full face masks BLS 5250 and BLS 5500
Application
322 ABEK1P3 R filter protects against organic, inorganic acid gases and vapours, sulphur dioxide, ammonia vapours and its derivates. Gases must have a boiling point above 65°C. It can be used with substances as solvents, toxic particles and microorganisms,etc. It is classified in terms of capacity as a class 1 gas filter (medium capacity filter) for the gas part and a class 3 filter (high capacity filter) for the dust part
Protection
Exposure limit for 322 ABEK1P3 R filter: With half masks: for gases an vapours until to 48* x TLV; with full face mask: for gases an vapours until to 1000* x TLV; * = NPF (Nominal Protection Factor) as detailed in EN 529:2005 standard
Materials
The 322 ABEK1P3 R filter is made of: • filter case: ABS • gas filtering part: activated charcoal ABEK • filtering layer: filtering pleated layer of glass fibres Height (thread excluded): 45 mm Diameter: 96 mm Weight: 140±7 grams
This filter can be used on full face masks and half masks
Application, Limitation, Warning
BLS filters cannot be used in the following conditions: - when the type and concentration of contaminant is unknown. -when the oxygen content is lower than 17% in volume (which is often the case in closed environments such as wells, tunnels, cisterns, etc). -when the contaminant is carbon monoxide or an odourless and tasteless gas. -when certain conditions are dangerous to the worker health and life. -The filter must not be modified or altered. - Leave the work area if the respirator becomes damaged, resulting in difficulty breathing and/or faintness. - Persons whose olfactory sense is altered shall not use filter respirators. -The use of gas or combined respiratory protective devices during works with open flames or liquid metal droplets may cause serious risk to the operator
Filter use and maintenance BLS filters must be used in pair connected to BLS half masks model TP2000 R and TP2000 S and to full face masks model BLS 5250 and BLS 5500. Carefully read the instructions for use of the filters and the one of the equipment (half mask or full face mask) is used with. Two new filters are packed in a sealed plastic bag. Choose the filter keeping attention to the colour and identification marking and check that the filter is of the correct type for the intended use. Check that the filter is not empire (the expiry date is printed on all the filters; this date shall be valid if the filter has been kept sealed at the recommended storage). Inspect both the filter and facepiece for any breaks or damage. For use, open the sealed packet, fit the two filters to the filter housing on the half mask or full face mask, screwing the filter tightly. Mind You: the P2 filters are used by being attached to gas filters positioning them over the gas filters and fixing in place by a plastic pressfit cover (the combined filters obtained with this coupling must be used always twin). In normal use conditions, the shelf life of the filter is not only due to the pollutant concentration but to many other elements difficult to be determined, such as the degree of air humidity, the air temperature, the inspired air volume, the weariness of the worker, etc. The worker shall leave immediately the work area and replace the filters when start to smell the contaminant. At the end of the work shift, the respirator shall be stored in a clean and dry place, according to the storage conditions indicated in the user information. The BLS filters does not require maintenance and does not need to be cleaned, regenerated or blown. Exhausted filters shall be replaced at the same time and dismantled according to the National regulations and considering the substances they have retained
Storage time: 5 years (factory sealed), as shown on labe - pictogram of hourglass
Storage conditions: temperature range -10°C e +50°C, Relative Humidity < 80%
فروشگاه اینترنتی ابزارآلات و تجهیزات ایمنی آچارک فیلتر ماسک، فیلتر شیمیایی، فیلتر ماسک شیمیایی، فیلتر ماسک نیم صورت، فیلتر ماسک تمام صورت، قیمت فیلتر ماسک، خرید فیلتر ماسک، کارتریج ماسک بی ال اس، زمان تعویض فیلتر ماسک و کارتریج ماسک را به راحتی در اختیار کاربران قرار می دهد.